Installing a Speaker in your Ford Taurus is a very simple process as Taurus has already set the specified spots for installing speakers. Upgrading your stereo would require you to step up to the next amperage speaker. You should purchase specialty audio system from any electronics store. They are going to be more than happy to help you in obtaining the sound quality desired in your Ford Taurus.

Removing the Present Speaker on Ford Taurus

1. Isolate the electrical system. Remove the unfavorable terminal from the battery.
2. Locate the spot the place the manufacturing facility audio system had been installed. You will have to remove the old Speaker earlier than putting in a brand new one.
3. Pry off the speaker cowl with a flathead screwdriver. The quilt will come out, exposing the outdated speaker.
4. Unscrew the hardware holding the speaker in place. There shall be four Phillips head screws centered around the speaker.
5. Pull the speaker out barely to access the wiring harness to the speakers. Unplug the wiring by pulling the harness clip. There will probably be a locking tab holding the harness in. Pull the tabs out to slide the harness out.
6. Pull the speaker out manually. Make sure the wiring harness is accessible for the brand new speaker.

Installing the Speaker on Ford Taurus

1. Connect the wiring harness to the brand new speakers. The harness ought to simply slide onto the brand new connector.
2. Place the brand new speakers within the door. Ensure the screw holes line up to the holes on the designated spot.
3. Tighten the screws down to hold the speaker in place. Tighten all of the screws with a Phillips head screwdriver.
4. Snap the quilt in place. Test the speaker by turning on the radio.